Click image to view full size image
16,20 t MH Model Electric Gantry Crane
Product Introduction
MH Model Electric Single Girder Gantry Crane is used with CD1, MD1 model electric hoists.It's a small and medium lifting equipment which can travel in rails.Lifting Weight is 3 to 10t, Span is 6 to 18m,Working Temperature is -20°C to 40°C.
This crane is a common gantry crane,it's usually used in outdoor and warehosue etc to load, unload or grabe material.There are two type operation form:ground and room control.
| Girder Form | Single Girder |
| Span (m) | 6 to 18 m |
| Sling Type | Cable |
| Structure | Boxed Type |
| Operation Form | pendant pushbutton control, cabin control or remote control |
| Moving Type | Wheel |
| Working Duty | A3-A5 |
| Color | As your requirements |
| Lifting Mechanism | Electric Hoist |
Technical Specifications:
| Lifting mechanism | ||||
| lifting weight | t | 16 | 20 | |
| lifting speed | m/min | 3.5 | 5 | |
| lifting height | m | 6 9 12 | ||
| working system | A3-A5 | |||
| motor | power | kw | 13 | 18.5 |
| rotation | r/min | 1380 | 1380 | |
| reducer speed ratio | ||||
| span distance | m | LK=6-22 | ||
| left and right suspension arm | ≤LK/4 | |||
| wirerope specifications | 6×37+1 | |||
| Power | Three phase,AC 380V,52HZ | |||
| Traveing Mechanism | |||||||
| 16T | 20T | ||||||
| gantry | trolley | ||||||
| working system | A3-A5 | ||||||
| lifting speed | m/min | 31 | 18 | 31 | 18 | ||
| motor | type | YZ160M | ZDY121-4 | YZ160,M | ZDY121-4 | ||
| power | kw | 4-8.5 | 0.8*2 | 4-8.5 | 0.8*2 | ||
| rotatoion | r/min | 890-920 | 1380 | 890-920 | 1380 | ||
| reducer | type | ZSC600 | ZSC600 | ||||
| speed ratio | 46.7 | 46.7 | |||||
| span distance | Ф500 | Ф154 | Ф500 | Ф154 | |||
| brake | YTZ/200 | YTZ/200 | |||||
1.Maximum lifting weight___kg
2.Span___m
3.Maximum lifting height____m
4.Crane usage and working duty________
5.Your other requirements_____________
6.Double Girder or Single Girder
THE BEST CHOICE FOR YOUR JOB
Attn: Caroline WangTel: 86 186 6368 4819